GeoSIG ETH-T1L Long Distance Ethernet Module
Key Features
- 2 ports 10BASE-T1L
- 2 ports 10/100BASE
- Standard TCP/IP network
- Power over Ethernet (PoE), no need to power any device separately
- Up to 1200 m of cable between modules
- Simple installation with screw-terminals
- Cost-effective cable
- Reduced installation time
- Unlimited possibility of extending the network to cover any distance
- Fully compatible with GeoSIG products
Downloads
Based on the new 10BASE-T1L standard, the ETH-T1L module is an innovative technology and ethernet switch for fast data communication over a long distance.
This ground-breaking solution provides a single-pair cable-based Ethernet infrastructure for data and power over 1200 meters.
It is an ideal solution for connecting accelerographs, recorders, and other data-intensive devices in vast installation settings allowing data transmission at speeds up to 10 MBps. The cost-effective cable and the simplicity of the wiring are the highlights of ETH-T1L, which empower and extend the capabilities of GeoSIG products, such as ela and albris.
This ground-breaking solution provides a single-pair cable-based Ethernet infrastructure for data and power over 1200 meters.
It is an ideal solution for connecting accelerographs, recorders, and other data-intensive devices in vast installation settings allowing data transmission at speeds up to 10 MBps. The cost-effective cable and the simplicity of the wiring are the highlights of ETH-T1L, which empower and extend the capabilities of GeoSIG products, such as ela and albris.
-
long distance link
- Number of ports:
- 2, both can be used as power source
- Standard:
- 10BASE-T1L, (IEEE 8-2.3cg-2019)
- Communication speed:
- 10 MBps
- Link Length:
- Up to 1500 m (data only), 1200 m (data + power)
- Max delivered power:
- 30 W per port (IEEE 802.3at, Type 2)
-
standard ethernet link
- Number of ports:
- 2, both can be used as power source (PoE)
- Standard:
- 10BASE-T, 100BASE-TX, (IEEE 802.3u)
- Communication speed:
- 100 MBps or 10 MBps
- Link Length:
- Up to 100 m, PoE
- Max delievered power:
- 30 W per port (IEEE 802.3at, Type 2)
-
cables and connectivity
- 10BASE-T1L Cables:
- 1x2xAWG18 (Date + Power), max 8 devices. ²
1x2xAWG22 (Data + Power), max one device < 5W
1x2xAWG24 (Data Only) - Recommended cable type:
- Compliant with IEC 61156-13 or IEC 61156-14
- Recommended cable impedance:
- 100 Ω
- Ethernet Link Cable:
- Min 2x2xAWG24, Cat5e or better
- Connector:
- Internal screw terminals or external connectors ¹
-
physical and environmental
- Type and IP rating:
- Steel or Stainless Steel¹ housing. IP66
- Size and weight:
- 205 x 150 x 80 mm, < 2 kg
- Input voltage:
- 54 V or AC/DC adaptor ¹
- Power consumption:
- < 1.5 W, excluding cable losses
-
**Specifications subject to change without notice
1) Optional
2) Actual number of connected devices depends on the device, wiring configuration and cable length