GeoSIG breva Biaxial Tiltmeter
Key Features
- Measures static and dynamic tilt
- Senses in positive and negative directions
- Large output span of - 10 V to + 10 V output over the measuring range
- Shock resistance more than 20'000 g
- High resolution < 0.005 % over range
- High repeatability < 0.01 % over range
- Built-in three-point levelling screws for easy installation
GeoSIG's breva is a biaxial tiltmeter featuring a high resolution and a shock-resistant sensor with long term stability. It measures the angle, slope, or tilt in two orthogonal directions for use in various applications.
Applications
- Structural Health and Response Monitoring
- Geotechnical (slope stability)
- Platform/ Rig/ Track alignment
**Specifications subject to change without notice
-
Sensor Element
- Measuring range:
- ± 3 °
- Resolution:
- < 0.005 °
- Repeatability at 0 °:
- < 0.01 °
- Noise:
- ± 0.0004 °
- Measuring direction:
- X and Y Axes
- Cross axis sensitivity:
- 4 %
- Damping
- 18 Hz
- Shock resistance:
- 20'000 g
- Output signal:
- ± 10 V
- Offset = V out in 0 °
- 0 V
-
Power
- DC power supply:
- 7 - 30 VDC, protected by OVP
-
Environment/Housing
- Housing Type:
- Cast aluminium, sealed access cover
- Housing Size:
- 195 x 112 x 95 mm
- Index of Protection:
- IP65, optional IP68
- Operational temperature:
- - 30 to +85 °C
- Storage temperature:
- - 30 to +85 °C
- Orientation:
- Floor mounted
- Mounting
- Single bolt, surface mount, adjustable within ± 3 °
.png)