|
Click
on the picture to download product leaflet
|
GeoSIG GNC-CR24 / -CR18 / -CR16 / -CR12 Central Recording
System
The GNC-CR Central Recording System is a Multichannel Recorder
containing several Recorder Module Cards. It can be extended
to an almost unlimited number of channels by adding further
12 Bit, 16 Bit or 18 Bit triggered Recorder Module Cards.
The Network Center provides on-line surveillance, common trigger,
common sampling and time synchronization (GPS, telephone and
radio modem interface are optional). The LCD indication informs
continuously about the current status of the Network Center.
The PC based software may be AllView or the newly released
GeoDAS Windows based software for managing the network, downloading
and analyzing records.
|
|
Click
on the picture to download product leaflet
|
GeoSIG CR-4 PC Based Structural Monitoring System
This multichannel PC based central recording system provides
engineers a tool to fully analyze and understand the dynamics
affecting a including acceleration, velocity, displacement,
temperature, current, wind speed and direction, stress and
pressure may be monitored and recorded. SEISLOG software running
under Windows 95/98 and NT provides near real-time display
of the dynamic channels, static data like mean, max, min,
and peak values. The CR-4 monitors the real-time data generated
by each of the sensors and compares the measured data to alarm
trigger criteria. The ring buffer size, post event time, trigger
thresholds and relay alarm on/off times may be selected by
the customer.
|
